Features

• High efficient in moisture absorption, filtering impurity, acid, paint remains and mud removal
• Hybrid desiccant
• Filtering fineness: 20?m
• Corrosion resistant painting can survive salt spray test of 500 hours.
• Connection type: thread or solder

General specifications

• Applicable for all common HCFC, HFC and CFC refrigerants such as: R22, R134a, R404A, R407C, R410A, R507
• Min./max. ambient temperature: -30°C to +55°C
• TS min./max.: -30°C / +120°C
• PS: 4,83 MPa
• Certifications: PED & UL/CSA

Technical Parameters

Note:
1) For CFC system, usage of core with alumina is recommended as a strong capability to absorb acid may be needed.
2) When the systems use oil with additive, it is not recommended to use a core with alumina.

Selection Table (T Series)

Selection Formulas

Filter Driers for liquid line are manufactured in compliance with ARI Standard 710. Maximum flow rate of liquid refrigerant at a differential pressure of 0,07bar (1psi) is indicated by kW (ton) which is based on the temperature of liquid refrigerant 30°C (86°F) and the following mass flow:

• 0,40 kg/min/kW (3.1 lb/min/ton) R134a
• 0,53 kg/min/kW (4.1 lb/min/ton) R404A, R507
• 0,39 kg/min/kW (3.0 lb/min/ton) R22, R407C
• 0,36 kg/min/kW (2.8 lb/min/ton) R410A

Note: Data on water absorption is based on the following EPD (method: ASHRAE Standard 63.1):

• 60ppm R22
• 15ppm R12
• 30ppm R502
• 50ppm R134a, R404A, R507, R410A, R407C

Note: The above data is based on clean system at ideal conditions; with impurities accumulated in the filter, the flow may decrease.

Dimensions